EN / USD

The actual operation of crystal glue, crystal Ab glue and crystal drop glue needs to pay attention to some problems

December 27th, 2023

The use of crystal glue, AB glue, crystal and circuit board waterproof glue, as well as in the actual operation process, the difference is still very big. Remember in the actual operation of crystal glue, the following points are very important and must be kept in mind!

1, in the process of using crystal glue, the first thing we need to do is to prepare the container, clean and dry the sign.
2, in the process of using crystal glue, after adjusting according to a certain proportion, it is necessary to remove the bubble.
3, after removing the bubbles, use a small beaker or syringe to drop evenly on the sign, which will solidify the effect.
4, when the gel solidifies, at this stage, we must pay attention to the problem of temperature and time control. In our actual operation, the gel temperature is usually 25 ° C, and its curing time is almost always within 36 hours. If you can't do it well in practice, then you have a big impact on the gel process.

In short, in the actual production process, the crystal glue can be adjusted according to the different needs of customers, which is conducive to our actual operation process.

Common classification of epoxy resins

What is the reason why the epoxy AB glue does not cure completely for a long time after dropping?

Sign In

The actual operation of crystal glue, crystal Ab glue and crystal drop glue needs to pay attention to some problems