Experimental materials: crystal dropper, container, dropper, dropper mold, specimen, stirring stick
Experimental steps:
1. Measure glue A, stir it into water sample, and let it stand for defoaming
2, add B glue (weight ratio 3:1; Volume ratio 2.5:1), continue to stir evenly (the disappearance of white filaments is about the same, about 1 minute), leave to defoaming.
3. Add a small amount of glue to the mold and wait for curing.
4. After curing or thickening with primer (generally about 10 hours later), you can put the dried specimen and set up your favorite shape
5, re-equipped with glue
6. After importing the mold, wait for curing (generally about 24 hours)
7. Unmold.
