Can epoxy AB glue stick to metal?

Epoxy AB adhesive for iron, copper and other metals have bonding effect, and water resistance, you can also use silica gel, but the strength is not as high as epoxy.

AB adhesive is a two-component epoxy resin ab adhesive, with high transparent properties, perfect after curing, no heating, can be cured at room temperature, environmental protection and non-toxic; High bonding strength, good toughness, oil resistance, water resistance and many other advantages; The cured material has good electrical and physical properties such as insulation, compression resistance and low shrinkage. Widely used in a variety of high-grade ceramics, glass, metal digital technology and other products manufacturing and repair.

AB glue has a wide range of applications, widely used in a variety of high-grade ceramics, glass, metal, crystal, jade, jewelry, granite, lighting, meters, crafts, sporting goods, leisure and entertainment equipment, furniture, decoration, digital technology and other products manufacturing and repair.

For the bonding between copper, iron, aluminum, stainless steel and other metal alloys, such as the bonding between stainless steel doors and Windows, furniture, pipes, plates, etc., high strength epoxy resin AB adhesive should be used to bond and fix. Because the two agents of epoxy resin AB glue A and B react and start curing after mixing, the curing can be completed within its operable time.

Attached is a copy of the instructions for use, WINGWAI resin, integrity for your service:
1. Remove moisture, dust, oil, etc. from the surface of the sticky material, and keep the surface to be sticky clean.
2, large area bonding, can be double-sided adhesive. The adhesive surface is coated with agent A and the other side with agent B. After bonding, it is necessary to rub several times.
3, small area bonding, AB agent can be mixed and coated on a bonding surface, and then bonded two bonding surfaces; Or coating with automatic mixing glue machine, about 3 to 5 minutes after laminating, you can get the initial strength, 24 hours later, the strength reaches the highest.

Matters needing attention
1, should pay attention to the ventilation of the work site; During use or after the operation, do not mix the two doses of AB together to avoid rapid reaction and risk.
2, A, B two agents such as a large number of mixed, will quickly cure and cause burning, should be particularly careful.
3, do not let children touch, not delicious.
4, after use, if the skin is attached to the agent, wash with soap.